AuraOMS ToolsAuraOMS 工具

Wavefold Runner CalculatorWavefold 走珠计算器

S-Wave / Wavefold heading · runner count from track length and opening style S-Wave / Wavefold 帘头 · 按轨道长度和开合方式计算走珠数

Seen from the room, looking at the window. Each pair of letters is one panel, read left to right. 从房间内看向窗户。每两个字母为一片,从左到右读。

W = fixed end: the end runner is locked at the track end and cannot be pulled. O = open end: the end runner is not fixed to the track end and can be moved. OO = free-running curtain. W = 固定端(走珠固定在轨道末端,不能拉动);O = 开放端(走珠不固定在轨道末端,可以拉动);OO = 自由运行窗帘。

Enter the track length above to calculate runners. 请在上方输入轨道长度以计算走珠数量。

How it works原理说明
Wavefold heading close-up: one runner on every wave crest, 6 cm apart. Schematic, not to scale. Wavefold 帘头特写:每个波峰上一颗走珠,间距 6 cm。示意图,非比例。
Single panel: codes WO, OW, OO. Example drawing for a 3000 mm track. 单片:代码 WO、OW、OO。示意图,以 3000 mm 轨道为例。
Double panel: codes WOOW, WOOO, OOOW, OOOO. Example drawing for a 3000 mm track. 双片:代码 WOOW、WOOO、OOOW、OOOO。示意图,以 3000 mm 轨道为例。

Calculated per SW-STD-001 v2.0 — S-Wave Curtain Runner (Hook) Calculation Standard (Lanqueen, controlled document). Runner count depends only on track length and the single/double opening — independent of fabric and motorisation. 依据 SW-STD-001 v2.0《S-WAVE 波浪帘走珠(挂钩)计算标准》(Lanqueen 受控文件)。走珠数量仅由轨道总长与单/双片开合方式决定,与面料、电动与否无关。

Wavefold / S-Wave heading only — other headings use different hardware and counts. 仅适用 Wavefold / S-Wave 帘头,其它帘头五金与数量不同。